Outdoor Living Today MAX66 Use and Care Manual download pdf (Page 11)

23. Position and attach the Door Header flush to outside end of Door Jamb with 2 - 2 1/2” screws per

side. Important- Drill 1/8” pilot holes in end of Door Header to prevent wood from splitting.

21. Locate Door Jambs. Align so attached filler strip is facing to the

outside. Position outside of Jamb flush with outside of siding. At the floor,

Jamb should be flush with floor framing.

Outside of

Jamb flush

with outside

of siding

Jamb flush with floor framing.

22. Attach Door Jamb to vertical wall stud with 4 - 2 1/2”

screws. Complete both Door Jambs.

End of Header

flush with outside

of Door Jamb.

confirm 64” between Jambs

1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

No comments

Outdoor Living Today MAX66 Use and Care Manual Page 11