Outdoor Living Today GGC63SR Installation Guide download pdf (Page 5)

Front

Gap at Front

5. With wall studs properly attached,

orientate completed walls around the

floor. Be sure to leave room to work.

Front Narrow Wall (2E) will be

required in this section.

Left Side Wall Panel

Wall Siding Flush

with Floor.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 5

Front

Back Wall Panels

Side Wall Panel

Front Narrow

Walls (2E)

Floor

Angled Left Side Wall

Side Wall Panel

6. Starting with angled left side wall, lift up and

position so framing is flush with floor at rear

of shed. Make sure wall siding is flush with

outside of floor on the side. In the front, there

will be a gap of approximately 5/8”. When

wall is positioned correctly, secure bottom wall

plate to floor with 4 - 2 1/2” Screws (C).

Rear

4 - 2 1/2” Screws

Bottom Wall Plate

Before

completely attaching

walls to floor (Steps 6-12),

check to make sure door

opening is 41” wide. See

Step 13 for illustration.

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Outdoor Living Today GGC63SR Installation Guide Page 5