Outdoor Living Today GGC63SR Installation Guide download pdf (Page 13)

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 13

27. From inside the shed, start securing the roof by screwing the door header into Roof Panel on an

angle with 3 - 2 1/2” Screws (C). Make sure screw tips do not go completely through roof panel. On the

sides and rear, screw from upper framing into Roof Panel. Use 2 screws per each wall panel. Screw on

an angle and make sure screw tips do not go completely through roof panel.

28. Locate 2 Front Filler Trims (4A) (1 1/2” x 5/8” x 65”).

Filler trim will be covered by corner trim in Step 37. Attach in

each front corner with 6 - 1 1/2” Finishing Nails (K).

29.

Locate Front Horizontal Trim (4B)

(3 1/2” x 1 1/4” thick at top x 68 1/4”).

Position horizontal trim tight up underneath roof

panel. From side-to-side evenly space. Secure

with 6 - 2 1/2” Screws (C) into door header.

Front Horizontal Trim (4B)

3/4” thick with additional bevel

attached to back - Thick side up

2 1/2” Screws

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Outdoor Living Today GGC63SR Installation Guide Page 13