Outdoor Living Today PEN99 Use and Care Manual download pdf (Page 24)

Side Facia -59 3/4” long

57. When installing Facia, start with Side Facia Board first (59 3/4” long). Align Facia on Hip Rafter

in Corner so flush to bottom of rafter. Facia should sit equally on the 45 degree cut on end of rafter.

On the opposite end, Side Facia should also sit flush to bottom of Front Hip Rafter and equally on

angle cut on end of rafter. Tack to rafter ends with 2 - finishing nails.

Facia

aligned

flush to

bottom of

rafter.

Side Facia

4x4 Post

58. Position and attach Front Facia (85 3/4” long) to the ends of each Front Hip Rafter as per

Step 57. Make sure to align Facia to bottom of rafter once again.

59. Position 2nd Side Facia (59 3/4” long) on rafter ends as per Step 57. If required, go back now

and adjust both the Front and previous Side Facia equally on rafter ends and secure completely with

6 - finishing nails per piece. Important: gaps occurring in corners will be covered by Decorative Detail

Facia Plates installed in Step 85.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

No comments

Outdoor Living Today PEN99 Use and Care Manual Page 24