Outdoor Living Today OSCAR63 Use and Care Manual download pdf (Page 7)

7. Check for wall/floor alignment

(wall siding flush with outside of

floor on sides and rear). When

satisfied, secure wall framing to

floor with 4 - 2 1/2” screws (A)

per wall panel.

8. Locate Rear Wall Top Cleat (4).

Center rear wall top cleat on top wall

framing. Attach with 6 - 2 1/2” screws

(A) down into framing. From side walls,

locate pre-drilled hole at top rear and

attach side wall to top cleat with

1 - 3” screw per side (C).

Place both Rear Wall Cleats (5).

against wall frames and attach each

cleat with 6 - 1 1/4” screws (J) into

wall framing. We recommend locating

one wall cleat 18” from bottom and the

other 18” higher.

9. Place Front Top Plate (6) between side walls at top

front. Side walls will be marked for plate alignment on

the inside framing. With you helpers holding one end,

secure opposite end with 2 - 3” screws (C). Side walls

are pre-drilled. Complete both ends.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 7

2 - 3” screws (C)

Side Wall Marked

Top Wall Framing

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Outdoor Living Today OSCAR63 Use and Care Manual Page 7